Enter/Exit Programming Mode
184 QuickScan™ I QD24XX/QBT24XX/QM24XX
Aztec Code Set Length 2
This feature specifies one of the bar code lengths for Aztec Code Length Control on page 182.
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode.
Characters can be set from 0001 to 3,832 characters in increments of
0001 (pad with zeroes).
See page 243 for detailed instructions on setting this feature.
Select Aztec Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric ch
ar-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EX
IT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save t
he entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
Length 2 is 3,832 Characters
To Next Page
Loading...
Need help?
General
