Datamax Mark II M-4206 - Page 20

18
Windows XP Driver and Port Installation
1
Start the Windows
“Add Printer Wizzard”
The following screen
should appear, click
‘Next>’.
2
Make sure that ‘Local
Printer’ is selected and
then click ‘Next’.
3
Select on ‘Create a new
port:’ and then select
‘Standard TCP/IP Port’
from the drop down
menu. Click ‘Next’
4
Click ‘Next’.
5
In the ‘Printer Name or
IP Address:’ field enter
the IP address of your
printer. The ‘Port
Name’ field does not
need to be changed.
When finished click
“Next’.
6
Make sure ‘Standard’
is selected and then
click ‘Next’.
7
Confirm your settings
and then click ‘Finish’.
8
Click on ‘Have Disk’.