Need help?Do you have a question about the Datamax Mark II and is the answer not in the manual?
General| Print Method | Thermal Transfer/Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Speed | 6 ips (152 mm/s) |
| Connectivity | USB, Serial, Parallel, Ethernet |
| Media Sensor | Reflective/Transmissive |
| Processor | 32 bit RISC processor |
| Media Types | Labels, Tags, Tickets |
| Media Thickness | 0.002 to 0.010 inches |
| Power Source | 100-240V AC, 47-63 Hz |
| Ribbon Width | 1.0 to 4.25 inches |
Provides information necessary to operate and maintain the printer.
Details the items included with the printer and additional requirements for label generation.
Explains how to connect the printer, load media, and print a configuration label.
Details the process of connecting the printer, including power and interface connections.
Explains how to identify the stationary or adjustable media sensor on the printer.
Provides step-by-step instructions for loading media into the printer.
Instructions for loading the ribbon when printing with thermal transfer media.
Introduces the printer's front panel, indicator lights, and multi-function buttons.
Explains the function and meaning of the printer's three indicator lights.
Details the functions of the printer's buttons in Ready Mode and during Delayed Power-Up.
Compares methods for configuring printer parameters like DMXConfig, Web Pages, and Drivers.
Explains how to use the DMXConfig utility for printer configuration and real-time control.
Guides on installing and using the Windows printer driver for label creation.
Details procedures for calibrating the media sensor for accurate detection.
Describes how to print resident information and test labels like configuration and test labels.
Details cleaning, adjusting, and troubleshooting tips for the printer, including a maintenance schedule.
Provides procedures for cleaning the printhead to maintain print quality and prevent damage.
Guides on adjusting the media width thumbwheel for various media widths.
Explains how to mechanically adjust the printhead for optimal print quality.
Step-by-step instructions for replacing a damaged printhead.
Instructions for downloading firmware updates and fonts to the printer.
Introduces troubleshooting common printer issues and lists potential solutions.
Lists common symptoms and page numbers of covered topics for quick troubleshooting assistance.
Details the physical dimensions, weight, and operating temperature of the printer.
Provides specifications for print method, speed, resolution, tear bar, and memory.
Describes the functions of the printer's three buttons in different modes.
Explains how buttons control settings like media type, communications, and options in Setup Mode.
Lists printer settings and their current values, accessible via the front panel.
Details the function and possible values for each item in the Printer Setup Menu List.
Provides a step-by-step example of modifying printer setup parameters via the front panel.
Explains the Label Alignment function for precise label positioning, detailing its modes and limitations.
Describes the 'YES' mode for Label Alignment, requiring manual measurement of label length.
Explains the 'AUTO' mode for Label Alignment, where the printer automatically calculates label length.
Details the 'NO' mode for Label Alignment, where printing starts at the current position without alignment.
Offers solutions for common problems encountered during label alignment.
Describes how buttons control media calibration, both automatic and manual.
Explains the automatic process for calibrating the media sensor to optimize sensing values.
Provides a procedure for manual media sensor calibration when auto-calibration fails.
Instructions to reset printer communication settings to factory defaults.
Guides on setting up the printer's IP address for network connection using static or DHCP.
Details configuring the wireless connection in Infrastructure Mode using static or DHCP IP.
Explains how to access and navigate the printer's internal web pages for advanced configuration.
Describes the DMXConfig utility for configuring wired and wireless printer setups.
Step-by-step guide for installing the printer driver on a Windows operating system.
To Next Page