To Next PageTo Next Page
Need help?Do you have a question about the Datamax MP-Compact4 and is the answer not in the manual?
General| Power Requirements | 100-240 VAC, 50-60 Hz |
|---|---|
| Print Method | Thermal Transfer / Direct Thermal |
| Print Resolution | 203 dpi |
| Maximum Print Length | Up to 90 inches |
| Media Thickness | 0.0025" to 0.01" (0.0635 mm to 0.254 mm) |
| Memory | 4 MB Flash, 8 MB SDRAM |
| Connectivity | USB, Serial |
| Media Sensors | Reflective and transmissive |
| Supported Media Types | Labels, Tags, Wristbands |
| Operating Temperature | 0°C to 40°C |
| Humidity | 20% to 85% (non-condensing) |
| Print Speed | Up to 4 ips (102 mm/s) |
Identifies key external components of the MP Compact4 base model printer.
Details external components specific to the MP Compact4 Mobile variant.
Details available ports for connecting the printer to a computer or server.
Instructions for cleaning the print head and roller on the base model.
Instructions for cleaning the printer when equipped with a cutter.
Detailed steps for safely removing and installing a new print head.
Guide on adjusting print head pressure for optimal media printing.
Instructions for installing the 150 mm media roll adapter kit.
Explains the Peel-Off accessory for separating labels from carrier paper.
Describes the Label Taken Sensor kit and its role in print control.
Steps for securely mounting the printer onto a wall.
Details the Print Head Diagnostic accessory for detecting print head issues.
Explains the Tower Mounting kit for stacking multiple printers.
Information on using the parallel cable for data conversion and software compatibility.
Details power requirements and connection for the MP Compact4 Mobile.
Instructions for vertically mounting the MP Compact4 Mobile printer.
Guide to selecting an appropriate battery based on printer usage factors.
Formula and example for calculating energy consumption and battery duration.
Provides solutions for common printing problems like greyish prints or feed errors.
