Need help?Do you have a question about the Datamax MP Compact4 Mark II and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Maximum Print Width | 4.1 inches (104 mm) |
| Media Type | die-cut, fan-fold, tag stock |
| Media Thickness | 0.0025" (0.0635 mm) to 0.01" (0.254 mm) |
| Media Roll Diameter | 5 inches (127 mm) max |
| Ribbon Length | 984 feet (300 meters) |
| Processor | 32-bit RISC |
| Interfaces | USB, Serial RS232 |
| Optional Interfaces | Wireless (802.11 b/g/n), Bluetooth |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 41 to 104°F (5 to 40°C) |
| Supported Barcode Types | UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Code 128, Interleaved 2 of 5, Codabar, PDF417, Data Matrix, QR Code, MaxiCode, Aztec |
| Print Resolution | 203 dpi (8 dots/mm) or 300 dpi (12 dots/mm) |
| Ribbon Width | 1" (25.4 mm) to 4.3" (110 mm) |
Introduces the MP Compact4 Mark II printer, its features, and connectivity options.
Details the items included with the printer and additional required items for operation.
Explains how to connect the printer to AC or DC power sources safely.
Describes how to connect the printer to a host via USB, serial, Ethernet, or wireless interfaces.
Provides step-by-step instructions for loading media and labels into the printer.
Details the printer's front panel components like the Status Light and Control Button.
How to print the configuration label and enter Hex Dump Mode for diagnostics.
Guides on installing the Windows printer driver from the CD-ROM or website.
Explains using TeraTerm for printer setup and configuration via serial port.
Provides a table outlining recommended maintenance and cleaning schedules for printer parts.
Details methods for cleaning the printhead using cleaning film or a cotton swab.
Provides instructions for safely replacing a damaged or worn printhead.
Guides on how to replace the platen roller assembly when it is damaged or worn.
Explains how to adjust printhead pressure to optimize print quality for different media types.
Details how to configure the media sensors using the TeraTerm utility for different media types.
Instructions for updating the printer's firmware from the manufacturer's website.
Lists the mechanical, printing, media, and communication specifications of the printer.
Discusses approved media types and their dimensions for optimal printer performance.
Covers connecting the antenna and IP addressing for network connectivity.
Explains how to access and use the printer's internal web pages for configuration.
Details the limited warranty statement for the printer and its thermal printhead.
Outlines the process for obtaining warranty service, including RMA procedures.
Covers general warranty terms, disclaimers, and limitations of liability.
To Next Page
