Need help?Do you have a question about the Datamax E-Class Mark III and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Resolution | 203 dpi (8 dots/mm) |
| Print Speed | Up to 6 ips |
| Max Print Width | 4.25 inches |
| Media Sensor | Reflective and Transmissive |
| Interfaces | USB, Serial |
| Media Types | Labels, Tags, Wristbands |
| Media Width | 0.75 in to 4.65 in |
| Media Thickness | 0.0025 in to 0.0100 in |
Procedures for loading various media types, including roll, fan-fold, and special options.
Instructions for loading thermal transfer ribbons into the printer.
Overview of different methods for configuring printer parameters.
Instructions for using the NETira CT configuration utility for printer setup.
Guide for installing and using the printer's Windows driver.
Procedures for calibrating the printer's media sensors for accurate printing.
Detailed procedures for cleaning the printhead using cotton swabs, cards, and films.
Step-by-step guide for replacing the printer's printhead.
Tips for resolving common issues like print quality, feeding errors, and power problems.
Procedure for setting a static IP address for wired network connections.
To Next Page
