Need help?Do you have a question about the Datamax RL4 and is the answer not in the manual?
Lists certifications and compliance standards for the printer.
Information regarding FCC compliance and potential radio frequency interference.
Instructions on how to charge the printer's battery.
Procedure for loading labels or paper into the printer.
Guide to using the NETira CT utility for printer setup and configuration.
Information on media types and the calibration process.
Procedure for performing a quick calibration of the printer's sensors.
Steps for manual sensor calibration when quick calibration fails.
Instructions for downloading and updating the printer's firmware.
Detailed procedure for cleaning the printer's printhead.
A list of symptoms and suggested solutions for printer issues.
How to set a static IP address or use DHCP for network configuration.
Steps to configure a static IP address for the printer.
Configuring security protocols for Wireless LAN connections.
Setting the printer's USB class (CDC, Printer, Composite).
To Next Page
General