To Next PageTo Next Page
Need help?Do you have a question about the Datamax A-4310 and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Print Speed | 10 ips |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Print Technology | Thermal Transfer |
| Memory | 16 MB DRAM / 8 MB Flash |
| Interface | Serial, Parallel, USB |
| Media Type | Labels, Tags, Tickets |
| Maximum Print Length | 99 inches |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, Postnet, PDF417 |
| Operating Temperature | 40°F to 104°F (4°C to 40°C) |
| Print Width | 4.16" (105.7 mm) |
| Media Width | 1.0" to 4.65" (25.4 mm to 118.1 mm) |
| Media Thickness | 0.0025" to 0.010" (0.0635 mm to 0.254 mm) |
Identifies the intended audience for this manual, focusing on programmers creating label software.
Explains the manual's coverage of DPL commands for Datamax printers and firmware versions.
Describes standard ASCII control labels representing one-character control codes for commands.
Explains available alternate modes for transmitting control codes when standard codes are unavailable.
Resets the printer to default settings, clearing buffers and DRAM memory.
Allows the host to check current printer status by returning an eight-character string.
Clears the print buffer, pauses the printer, and illuminates the Paused/Stop Indicator.
Instructs the printer to send a single status byte representing printer status flags.
Sets the printer's internal time and date, stored in the inch counter.
Precedes image downloading, allowing the printer to receive image data from a host.
Sets the media distance to search for top-of-form before declaring a paper fault.
Clears all Flash and DRAM modules, destroying all stored data.
Requests a memory module directory listing, showing results based on printer class and firmware.
