How to fix Datamax Apex 4 Printer if it does not feed paper or has a paper jam?
If your Datamax Printer isn't feeding paper or has a paper jam, you should remove any jammed supply and reload the paper supply.
What to do if my Datamax Apex 4 Printer does not print?
If your Datamax Printer isn't printing, first, check or replace the printer’s battery. Second, ensure the paper supply is loaded correctly, not backwards. Finally, verify communication between the host device and the printer by disconnecting the communication cable and performing a printer self test.
How to fix light printing on a Datamax Apex 4?
If your Datamax Printer is printing too lightly, check or recharge the battery. Also, adjust the print contrast through the print application.
Why is the red (error) LED on my Datamax Printer?
If the red (error) LED is on for your Datamax Printer, check that the paper roll is not out and the paper door is closed. It could also indicate an error reading the MCR. Also, after extended printing, the print head may be hot; in this case, the printer will pause before resuming printing.
Details contents of the printer package for the APEX 4.
Instructions for installing and charging the printer's battery.
How to power on the printer and perform an initial self-test.
Steps for cleaning the printer's print head and rollers.
Procedures for charging and important notes on replacing the printer battery.
Common problems and their solutions for the printer.
To Next Page
General