Extended System-Level Command Functions
Class Series Programmer’s Manual 99
STX Kq Query Memory Configuration (new format, Display-Equipped Models only)
This command causes the printer to transmit its internal DRAM memory configuration to the host
device. The transmitted data provides information regarding the total amount of internal DRAM
installed, the amount available for configuration, and the amount currently assigned to specific
functions or entities.
Syntax:
<STX>Kq<CR>
Printer response format:
Memory Configuration<CR>
Product: aaaacdd.ee mm/dd/yy<CR>
Installed RAM: iiiiMB<CR>
Label Width: vvvvoo<CR>
Print Buffer Size: :xxxxoo<CR>
Allocation RAM: ssssKB<CR>
Internal Files LLLLKB<CR>
Font Cache wwww:KB<CR>
Where:
<CR>
- ASCII Carriage Return (0x0D) record delimiter.
aaaacdd.ee
mm/dd/yy
- ASCII string sequence that represents the firmware
version number string.
iiii
- The number of megabytes of installed internal DRAM
memory.
vvvv
- The length of the Label Width.
xxxx
- The length of the Print Buffer.
ssss
- The number of kilobytes of internal memory assigned to
the label Print Buffer.
LLLL
- The number of kilobytes assigned to the internal memory
module.
wwww
- The number of kilobytes assigned to the Scalable Cache.
oo
- Current label dimension unit’s designation. “IN” for inches
and “MM” for millimeters.
STX KR Reset Memory Configuration
(Non-Display Models only)
This command resets the printer’s DRAM configuration to the default settings; see <STX>KM.
Syntax:
<STX>KR<CR>
Note: This command will result in a system reset for the EX2.
To Next Page
Loading...
Need help?
General