EasyManuals Logo

Datamax Mark II User Manual

Datamax Mark II
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
36 Appendix A – Specifications
Media / Ribbon
Media Types Roll-Fed, Die-Cut, Continuous, Fan-Fold
Max. Media Width 4.3 inches (109mm)
Min. Media Width 0.75 inches (19mm)
Max. Print Width
E-4205e: 4.25 inches (108mm)
E-4304e: 4.12 inches (106mm)
Print Length Range
.375 – 100 inches (9.5 - 2540mm); min length of 1 .25 inches
(31.8mm) with optional Cutter.
Media Thickness Range
.0025 - .01 inches (.064 - .254mm); up to .007 inches (.117mm) with
optional Cutter;
Media Supply Roll Capacity 5 inches (127mm) O.D. on a 1 inch (25.4mm) core
Ribbon Width Range 1.0 - 4.3 inches (25 - 110mm)
Ribbon Roll Capacity
Matched to media: approx. 361 feet (110m) long with a 1.5 inch
(38mm) O.D. on a .5 inch core
Communications
Interface Ports (standard) USB, RS-232 (DB-9), & IEEE 1284 compliant Parallel (36 pin)
Baud Speed 600 to 38,400 bits per second (BPS)
Handshaking Xon/Xoff, CTS, DTR
Parity Even, Odd, or None
Stop Bits 1 or 2
Data Bits 7 or 8
Fonts
9 Bit Mapped Fonts rotated 0, 90, 180, and 270 degrees.
Embedded Bar Codes
32 embedded barcodes (see the Class Series 2 Programmer’s Manual for a detailed listing).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datamax Mark II and is the answer not in the manual?

Datamax Mark II Specifications

General IconGeneral
Print MethodThermal Transfer/Direct Thermal
Resolution203 dpi
Max Print Speed6 ips (152 mm/s)
ConnectivityUSB, Serial, Parallel, Ethernet
Media SensorReflective/Transmissive
Processor32 bit RISC processor
Media TypesLabels, Tags, Tickets
Media Thickness0.002 to 0.010 inches
Power Source100-240V AC, 47-63 Hz
Ribbon Width1.0 to 4.25 inches

Related product manuals