Datapath X4 - Setting up the x4; Connection and Power-Up Procedure; Input Signal Monitoring and Adjustment

Region 4
For the width, calculate the following:
The distance between C to D (730mm) divided by the distance between I to K (2500mm) multiplied
by the source width (1920).
(730 ÷ 2500) x 1920 = 561
Input the number 561 as the Width for Region 4.
For the height, calculate the following:
Measure the active screen area between N and C
In this example N to C = 730mm.
The distance between N to C (730mm) divided by the distance between A to C (1500mm) multiplied
by the source height(1080).
(730 ÷ 1500) x 1080 = 526
Input the number 526 as the Height for Region 4.
To calculate the Top number for Region 4
Measure the distance from A to C (inside bezels).
In this example A to C = 1500mm.
Calculate the following:
The distance between A to C (1500mm) minus the distance between C to N (730mm) divided by A
to C (1500mm) multiplied by the source height (1080).
(1500 - 730) ÷ 1500 x 1080 = 554
Enter 554 into the Top box for Region 4.
Alternatively, simply subtract the the previously calculated region height (526) from the known input
canvas height:
1080 - 526 = 554 lines
To calculate the Left number for Region 4:
Measure the distance from I to N (inside bezels).
In this example I to N = 730mm.
Calculate the following:
The distance between I to N (730mm) divided by I to K (2500mm) multiplied by the source width
(1920).
(730 ÷ 2500) x 1920 = 561
Enter 561 into the Top box for Region 4.
13