6
1. Introduction
The MCU-200S is a multiple camera controller designed for controlling SONY studio or portable
camcorders. Its useful and user-friendly design allows you to connect a maximum of 4 SONY
camcorders through the Ethernet cables and an adapter box. Major functions of several SONY
camcorders can be easily operated and controlled using the MCU-200S at up to 300m away from
the controller unit.
The Datavideo MCU-200S Controller is capable of remotely configuring SONY Camcorders from an
OB Van. The MCU-200S can connect up to four SONY cameras allowing settings from one camera
to be quickly aligned with other cameras. With features similar to the SONY Extension Control Unit,
the MCU-200S reduces cost in manpower and equipment and saves setup time and disk space for
you.
To get more value out of this equipment please take a few minutes to read through this manual.
This will help familiarizing yourself with all the aspects of the MCU-200S control unit.
That’s Datavideo; sharing the value!
1.1 Features
• Four RJ-45 Ethernet ports allow remote setup of up to four SONY cameras.
• RJ-45 cabling allows unit to be placed up to 300m away from the camera(s).
• Control of Record and Playback functions.
• Control of Camera User memory functions.
• Control of Camera OSD Menu Navigation.
• Control of Shutter speed and degree functions.
• Control of Iris adjustment.
• Control of AWB & ABB functions.
• Control of White Balance A, B and Preset functions.
• Control of Camera Knee & Bars functions.
• Control of Camera Gain adjustment.
• RGB Black Level / R & B gain and Master Pedestal controls.
1.2 Compatible SONY Camera Models*
• PMW - F5 / EX3 / EX350 / 300K2 / 350K / 320 / 400
• PDW - 510 / 510P / F55
• PMW - F3 / 300 / 350
• HDW - 730S / 750P / 790P / F900R
*Note: Please see the product page on our official website for the updated list.
To Next Page
Loading...
Need help?
General
