Datavideo MCU-200S - Seven Segment Display and LED Indicators

15
LED display
The IRIS
value, Shutter degree, speed, Gain and Filter
positions can be displayed here by using the CHECK
button.
*The M. PED, PAINTING GAIN R/B and BLACK R/G/B
values can also be displayed sequentially here. See CHECK
button also.
When in LOCK mode this display will show Lock.
Note: The LED display functions may be modified during
the firmware upgrade process.
EXT LED
This LED will be ON when a lens extender is detected on
the chosen camera.
Note: The EXT LED function may be modified during the
firmware upgrade process.
IRIS control
Used to adjust the Iris value. See IRIS and CHECK buttons
also.
Seven Segment Display and LED Indicators
Deg Indicator
To indicate the displayed format of SHUTTER value.
ON: Shutter angle is displayed.
OFF: Shutter speed is displayed.
SHTR Indicator This lights up when LED display shows SHUTTER (speed) value.
GAIN Indicator This lights up when LED display shows GAIN value (in dB).
FILTER Indicator This lights up when LED display shows ND FILTER mode (F1~F5).