Need help?Do you have a question about the Datavideo RMC-185 and is the answer not in the manual?
General| Type | Camera Controller |
|---|---|
| Control Protocols | VISCA, PELCO-D, PELCO-P |
| Number of Camera Control | Up to 4 cameras |
| Joystick | Yes |
| Tally Output | Yes |
| Power Supply | DC 12V |
| Compatibility | Datavideo PTZ cameras and other compatible cameras |
| Communication Ports | RS-422 |
Covers manufacturing defects for one year, requiring proof of purchase for repairs.
Provides a two-year extension to the standard warranty upon product registration.
Instructions for EU customers on proper disposal of waste electrical and electronic equipment.
Highlights include remote control of eight frame views, joystick pan/tilt/zoom, and preset storage.
Explains connecting the RMC-185 to the KMU-100 and powering on the system.
Details the RMC-185 front panel: LCD display, menu dials, multiviewer modes, and selection buttons.
Describes rear panel ports for firmware upgrade, KMU remote connection, DC power input, and power switch.
Configure input sources (A/B), output formats, genlock status, and termination.
Set SDI 3G type and access the function to exit the setup menu.
Settings for multiviewer swap/SDI modes and external motion trigger method.
View KMU-100 firmware version, temperatures, and RMC-185 firmware version.
Procedure for storing current device settings into one of four preset buttons.
Step-by-step guide to update the RMC-185 firmware using a PC and USB cable.
Provides physical measurements (W x H x D) of the RMC-185 controller in millimeters.
Lists key specifications including firmware upgrade method, power, weight, and operating conditions.
To Next Page
