Datecs DPP-450 - DPP-450 Communication and Power Settings; DPP-450 Memory Switches and Baud Rate Settings

1 DATECS DPP-450 User manual
20
FACTORY DEFAULT
YES
NO
MEM. SWITCHES
ENABLE SOUND Enable/Disable printer's buzzer
EXECUTE <CR> AS <LF> Disable CR/CR is executed as LF
DISABLE <LF> COMMAND Enable/Disable LF
DISABLE<LF>AFTER Disable LF immediately after CR
DEFAULT SMALL FONT Set the small font as default
USE GAP SENSOR Enable/Disable the GAP sensor
BLACK MARK MODE Enable/Disable the black mark sensor
XON/XOFF Enable/Disable XON/XOFF protocol
ENABLE USB INTERFACE Enable/Disable USB communication port
USB IN DEVICE MODE Changing the USB HOST/DEVICE mode
PROTOCOL MODE Enable/Disable Protocol mode
DISABLE BLUETOOTH Enable/Disable Bluethooth communication
DEFAULT SELECT DISP Set the main display as default
DISABLEDISCOVERABILITY Enable/Disable printer's discoverability
LCD FOREIGN LANGUAGE
DISCARD Exit without saving configuration
ACCEPT Exit with saving configuration
BAUDRATE Changing the printer communication speed (RS)
• 115200 bps
• 38400 bps
• 31200 bps
• 2400 bps
• 4800 bps
• 9600 bps
• 19200 bps
• 57600 bps
IrDA BAUD RATE Changing the IrDA communication speed
• 19200 bps
• 9600 bps
• 38400 bps
• 57600 bps
• 115200 bps
AUTO OFF TIME Changing the printer's auto OFF time
• 10 min.
• 15 min.
• 20 min.
• 30 min.
• 45 min.
• 60 min.
• 0 min