Datron neo - Page 11

Connecting the supply media
Network integration
2
Setup instructions neo
1.21
DATRON AG
2-3
Fig. 2-2: Integration of the DATRON computer in a company
network
1
Control computer of the DATRON machine
2
USB port at the control computer
3
Hardware firewall
4
Company network
The establishment of a network connection (internet, in-house data
exchange) must be made without changing the configuration of
the control computer (for instance, integration into a domain).
For network integration, DATRON recommends using a hardware
firewall between the control computer and the company network
(see Fig. 2-2).
Only virus-tested media may be connected to the USB port of the
control computer.
Data exchange
Data is exchanged with program administration sing a USB stick.