Features & Functionality
Your Davey ProMaster VSD Pool Pump has several operational features:
• Multi-Coloured LED indicator light
- Used for identifying required settings for programming time for full speed
(Boost) cycling and warnings:
> Solid Green = Normal Dial Operation
> Slow Flashing Green = Backwash
> Fast Flashing Green = AUX External Control Solid
> White = Speed Compensation Active Slow
> Flashing White = Time to Backwash
> Fast Flashing White = Fault detected - reset pump
> Slow Flashing Blue = Operated by Bluetooth
> Solid Blue = Bluetooth Pairing Mode
• Patented water-cooled design for smooth and super quiet operation
- The pump has a water-cooled membrane and jacket around the motor
which helps to keep the pump cool during operation
- Waste heat off the motor is transferred into the pool water, helping to
reduce pool heating energy costs
• Constant Flow/Speed Compensation (PM400BT model only)
- Helps to overcomes friction loses experienced as debris builds up in your
media filter or cartridge filter
- Saves on energy running costs, due to the pump running at minimum
turnover flow rate, between backwashes
• Weatherproof RJ45 Communication Port (PM400BT model only)
(See page 19 for connection details)
- For communication and connecting to external Pool Control systems
- For receiving a signal from a Heat Pump or Gas Heater to ramp the VSD
pump speed to full during the heating process
- Service diagnostics and software updates (For Davey use only)
• Backwash Speed Cycling Technology
- When in backwash mode the pump will cycle between a low and high speed
to help air-rate and agitate the filter media for a more effective clean
- Reduces wasted water during the backwash cycling process
To Next Page
Loading...
Need help?
General
