• Full variable frequency drive with user friendly selectable speed dial
-
Provides for easy selection of desired filtration speed
-
No complicated digital push button controls
• Large 4.5 litre lint pot
- Provides for longer intervals between cleaning
Bluetooth App Setup
- 1. Open the “App Store” app that is available on your device.
- 2. Search “Davey Pool Pump”
- 3. Install the app on your device
The app can be installed on to as many devices as desired, however, only one
device can control the pump at any given time. The language and time of the
app is the same as your device setting. The measuring units are automatically
defaulted to your device’s region units, however, you can choose between
Litres, Gallons or m
3
/hr.
• Pairing a device to the pump
- 1. Open app
- 2. Turn dial on the pump from “off” to “Bluetooth”, you will see the LED
flash white for a second.
- 3. Press the scan button.
- 4. When setting up for the first time ONLY, select “YES” to allowing
location
- 5. Please note that the first time the devices are paired, there is a 2 minute
time limit to do so before the procedure will have to be repeated.
To Next Page
Loading...
