Prior to using this pump you must ensure that: Checklist
• Speed (including priming and backwash) setting chosen is a compatible
setting with other pool equipment c
• The pump is installed in a safe and dry environment c
• The pump enclosure has adequate drainage in the event of leakage c
• Any transport plugs are removed c
• The pipe-work is correctly sealed and supported c
• The pump is filled with water to the inlet c
• The power supply is correctly connected c
• All steps have been taken for safe operation c
• The filter has been plumbed with 40mm/50mm pipe c
• The (App) schedule settings correspond with any other times in the system c
To Next Page
Loading...
Need help?
General
