DAVID 5 - Scan Result Processing

10/31/2016 DAVIDDAVID5Manual
http://www.david3d.com/en/support/david5/printversion 24/37
AutoGrabTexture
Automatically grabs a color texture when scan sequence is finished.
↑ | Scanning | Scan Result
Extended View
When scanning with two cameras, you can check the ExtendedView checkbox, to extend the view on the
object beyond what both cameras can see at the same time. But precision and accuracy are best for the
pure stereo view only (unchecked ExtendedView ).
Smoothing
With the smoothing filters under "Scan Result" you can smooth the 3D scan result manually. However, we
recommend not to do this (set filters to 0). If your scans are noisy or wavy, you should rather optimize the
scanning conditions (brightness settings, room conditions). More smoothing options are available in the
"Shape Fusion" menu later on.
Quality Check
The filter QualityCheck removes scan data that are likely to be inaccurate. This is possibly on the edge of
the scan or at transitions between light and dark areas. You can change the filter value and see the effect
immediately on the scan. The recommended value is 0.5.
Background Removal