DAVID 5 - Select Objects

10/31/2016 DAVIDDAVID5Manual
http://www.david3d.com/en/support/david5/printversion 36/37
3D Navigation
You can move around your scans in 3D by mouse:
LeftMouseButtonDown+MouseMove
Move the view.
MouseWheel
Zoom in/out.
RightMouseButtonDown+MouseMove
Inside white circle: Rotate the view around vertical and horizontal axis.
Outside white circle: Rotate the view around view direction.
RightMouseButtonClick
Right-click on object surface point: That point will be set as the new rotation center point.
A
Auto adjust camera view to all objects or selected objects. The rotation center point is set to the
center of all scans.
Select Objects
Click with LeftMouseButton on the object you want to select. For multi selection hold Ctrl down. To
deselect all objects click on the background.
Move Selected Object
Select a scan with a left-click, then keep the Shift key pressed. The manipulation is similar to the 3D
navigation with the left and right mouse button:
Shift+LeftMouseButton
Move (translate) scan under mouse pointer.