DAVID 5 - User Manual

10/31/2016 DAVIDDAVID5Manual
http://www.david3d.com/en/support/david5/printversion 1/37
Introduction
Installation
Setup
Connections
Camera Positioning
Camera Setup
Projector Setup
Calibration
Scanning
SL Scanning
Scan Result
Pattern Parameters
Camera Control
Projector Control
Shape Fusion
Project
List of Scans
Cleaning
Alignment
Fusion
A-B Distances
Comparison
3D Viewer

Summary

Installation

Software and Driver Installation

Guide to installing the DAVID software and necessary drivers.

Setup

Connections

Calibration

Setup Calibration Panel and Scale

Preparing the calibration panel and selecting the correct pattern scale.

Performing Calibration

Entering scale, checking camera image, and running the calibration process.

Scanning

SL Scanning Process

Capturing scans using Structured Light Scanning modes.

Scan Result Processing

Camera Control

Shape Fusion

Project and Scan Management

Cleaning and Alignment

Removing scan noise and aligning multiple scans together.

Fusion Process

Merging aligned scans into a single, cohesive 3D model.

DAVID 5 Specifications

General

Brand	DAVID
Model	5
Category	Scanner
Language	English