DAVID 5 - Cleaning and Alignment

10/31/2016 DAVIDDAVID5Manual
http://www.david3d.com/en/support/david5/printversion 29/37
In general, the individual scans are collected via the AddtoList button during scanning, or automatically
in Scan Sequence or Automatic Turntable modes. You can import more scans into the "List of Scans" -
either by drag and drop from the Explorer, or using the + icon below the list.
In the list individual scans can be made visible / invisible by click on .
Supported file formats for import / export:
DAVIDMESH Proprietary DAVID file format. All mesh data is saved. Default for projects. Import /
Export
OBJ 3D object file format from Wavefront Technologies. Some meta data is
lost in export.
Import /
Export
STL STereoLithography file format. Only geometry is imported and exported. Import /
Export
PLY Polygon file format. Only geometry is exported. Export
RightMouseButton on selected scans shows up a context menu with various options.
Use button ScanProperties (blue i button) on selected scans to get additional information like triangle
count, vertex count, pose, surface area, volume, and more.
↑ | Shape Fusion | Cleaning