DAVID 5 - Project and Scan Management

10/31/2016 DAVIDDAVID5Manual
http://www.david3d.com/en/support/david5/printversion 28/37
Alignment
Fusion
A-B Distances
Comparison
3D Viewer
The "Shape Fusion" menu provides functions to clean, align and fuse/merge several scans into a single
360° model, compare scans, and measure distances. The fused object subsequently can be exported to
various formats, to be used e.g. for 3D printing.
↑ | Shape Fusion | Project
Use buttons SaveProjectAs... and SaveProject under "Project" to save all relevant data (like scans,
fusion result, and measurements) within a single project file. LoadProject discards the current project and
loads an existing one into DAVID 5.
Using projects should be the preferred method to save your data in DAVID 5. It is much faster and
easier than using multiple OBJ files.
↑ | Shape Fusion | List of Scans