EasyManuals Logo

DAVIS Vantage Pro2 Getting Started Guide

DAVIS Vantage Pro2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Installing the Software
4
toolbar or select Hang Up from the File menu to disconnect the phone con-
nection.
Toolbar with On-Line Icon
By default, WeatherLink hangs up the connection to the modem after one
minute without any communication with the station. Use the Communica-
tions Port dialog box in the Setup menu of WeatherLink to change this
default value. (See the WeatherLink help files for more information.)
Note: WeatherLink does not hang up the phone line if the bulletin, summary, or other win-
dows receiving real-time data from the console are active.
Software Installation and Setup
It is easy to install and setup WeatherLink on your computer once the con-
nection to your console has been configured. Walk through the following
section to setup and configure your WeatherLink software and the connec-
tion to your console.
Installing the Software
1. Place the Install Disk in your CD ROM drive.
2. Double click on the package file, "WeatherLink 5.1.mpkg."
Note: Your version number may be different.
3. Follow the on-screen prompts to complete the installation.
Optional: Installing USB drivers
Specialized USB drivers must be installed when you connect a Vantage
Pro, Vantage Pro2, Envoy, or Vantage Vue to your Mac via a USB connec-
tion. Once you have installed WeatherLink, but before you open the pro-
gram, install the specialized drivers that come on the Installation CD.
1. Open the USB installer package (the folder marked Davis USB
Datalogger Drivers) located on the Install disk.
2. Run “SLAB_USBtoUART Installer”. The necessary USB drivers install
and you are prompted to restart your computer.
3. Restart your computer.
4. When the Communications Configuration dialog box displays, select
SLAB_USBtoUART as your port.
On-Line
(Hang Up)

Other manuals for DAVIS Vantage Pro2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DAVIS Vantage Pro2 and is the answer not in the manual?

DAVIS Vantage Pro2 Specifications

General IconGeneral
Update Interval2.5 seconds
Temperature Accuracy±1°F (±0.5°C)
Barometric Pressure Range16.00 to 32.50 inHg (540 to 1100 hPa)
Rain Collector TypeTipping bucket
Wind Speed Range0 to 200 mph (0 to 322 km/h)
Wind Speed Accuracy±2 mph (±3 km/h) or ±5%, whichever is greater
Wind Direction Resolution
Wind Direction Accuracy±3°
Solar Radiation Range0 to 1800 W/m²
Solar Radiation Sensor Accuracy±5%
UV Index Range0 to 16
UV Index Accuracy±5%
Wireless Transmission RangeUp to 1000 ft (300 m)
Temperature Range-40°F to +150°F (-40°C to +65°C)
Humidity Range0 to 100%
Humidity Accuracy±3%
Rain Collector Resolution0.01 in (0.2 mm)
Rain Measurement Accuracy±4%
Wind Direction Range0 to 360°
Power SupplySolar powered with battery backup

Related product manuals