EasyManuals Logo

DAVIS Vantage Vue Manual

DAVIS Vantage Vue
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Install the Data Logger
4
3. Carefully insert the data logger (Serial, USB or IP) into the connector slot,
making sure to push the data logger firmly into place.
Inserting the Serial, USB or IP data logger into the Envoy
4. Rejoin the case halves, making sure the data logger cable passes through the
cable channel.
5. Fasten using the three screws you removed in step 1.
Data Logger
Cable Channel
Serial
Data Logger
Data Logger
Cable Channel
USB
Data Logger
Data Logger
Cable Channel
WeatherLinkIP
Data Logger

Other manuals for DAVIS Vantage Vue

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DAVIS Vantage Vue and is the answer not in the manual?

DAVIS Vantage Vue Specifications

General IconGeneral
Wind Speed Range2 to 150 mph (3 to 241 km/h)
Rain Collector Resolution0.01 in (0.2 mm)
Rain Collector TypeTipping bucket
Update Interval2.5 seconds
Temperature Accuracy±1°F (±0.5°C)
Humidity Accuracy±3%
Wireless Transmission Rangeup to 1000 ft (300 m)
Humidity Range1 to 100% RH
Wind Direction0 to 360°
Wind Direction Accuracy±3°
Power SupplySolar-powered with battery backup
Console DisplayLCD with backlight
Power (Console)3 C batteries or AC adapter
Wind Speed Accuracy±2 mph (±3 km/h) or ±5%, whichever is greater
Solar Radiation SensorNot included
UV SensorNot included
Rain Measurement Accuracy±4% at rates up to 2 in (50 mm) per hour

Related product manuals