DAVIS Weather Envoy Vantage Pro2 User Manual

5
Wireless Repeater Installation Overview
The following is a overview of the steps involved for installing a repeater or series of
repeaters as part of your Vantage Pro2 wireless network:
• Determine the repeater/station configuration best suited to your wireless network.
• Apply power (battery or AC power).
• Verify communication with a station(s).
• Choose a location(s) for repeater(s).
• Test proposed location for signal strength.
• Configure the console or Envoy (and WeatherLink software, as needed) for repeater
identification.

DAVIS Weather Envoy Vantage Pro2 Specifications

General

Brand	DAVIS
Model	Weather Envoy Vantage Pro2
Category	Weather Station
Language	English