EasyManuals Logo
Home>Dawlance>Washer>DWT 260 C LVS+

Dawlance DWT 260 C LVS+ User Manual

Dawlance DWT 260 C LVS+
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
0807
Water inlet installation
Before using
Connect the inlet hose connector with the inlet hose
Check the connection between inlet hose
connector and the tap
Inlet valve connector
Inlet hose nut
Water absorption cushion
Lock lever
Inlet hose connector
Slider
1. Push down the slider, insert the inlet hose into the connector
2. Hang the lock lever to the inlet hose connector and release
the slider till a click sound is heard.
1. Swing the inlet hose gently to conrm if it is fastened.
2. After installation, open the tap and check if it leaks.
3. Do not bend the inlet hose with overstrain.
4. Before each usage, check the connection between
inlet hose connector and the tap, and the installation
of inlet hose. Make sure they are rmly tted to prevent
dropping from improper installation position.
Slider
Lock lever
Connect the inlet hose with the washing machine
1. Do not take off the water absorption cushion. Please
check if the cushion is dropped or damaged before
each usage. If it is, contact the seller immediately.
2. Put the inlet hose nut on the inlet valve connector.
3. Fasten the inlet hose nut and swing it gently to make
sue if it is suitable.
1. Close the tap.
2. Press the locking lever, push down the slider, and pull of the
inlet hose. If the machine is used frequently, the connector
of the inlet hose can be kept on the tap to prevent damaging
the xing screw.
Dismantle the inlet hose
Cautions: When install the washing machine, please use the new hose assy along with the washing
machine, old hose assy cannot reuse.
Preparation before
operation
Operation
Preparation before washing
1. Connect the inlet hose and open the tap.
2. This appliance must be earthed. Conrm
the socket is earthed reliably and insert the
power plug. The earth terminal should not
link to gas pipeline, tap pipeline etc.
3. Put down the drainpipe.
Before washing the laundries, please pay attention to the followings:
Make sure if there is
special requirements
for the laundries
Before washing, empty
all pockets of small
objects which may
have been left inside
(coins, keys, screws etc.)
As these could damage
the drain pump.
Knot the long band,
fasten the buttons
and close the zippers.
Do not overload the
machine. Load the
laundry loosely
alternating large
items with small ones.
Sort the laundry
according to the type
of fabric, color-fastness
and how dirty it is. Put
thin laundries, woolens
and such prone to wear
and tear laundries into
washing bag.
A. Make sure the laundries are washable.
B. It is essential to wash new colored items separately when washing for the rst time. White items
should not be washed with colored items.
C. Please immerge the non-absorbable laundries by hand.
D. Some stains such as fruit, wine, grass, rust etc. are difcult to remove and should be treated
before washing with specic products, which can be found in most household shops. In some
cases it may help to soak the stain before washing with a special pre-soak
product or biological
detergent.
E. Over turn the nap fabric and long oss laundries before putting them into the machine.
F. Do not put the laundries polluted by chemicals into the machine directly.
G. Very small item (handkerchiefs, ribbons, socks etc.) should be washed in a washing bag or a pillow case.
Warning: The temperature of the water should less than 50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dawlance DWT 260 C LVS+ and is the answer not in the manual?

Dawlance DWT 260 C LVS+ Specifications

General IconGeneral
BrandDawlance
ModelDWT 260 C LVS+
CategoryWasher
LanguageEnglish

Related product manuals