Daymak MAX - Charging the Tofino X 36 V

15
Charging the Max
First take the charger that came with your Max and plug it into the the wall. Once you have
done that locate the charging port of the Max located on the le side of the baery. You
may have to li up the handle to acces it.
Once the bike is charging the charger will glow red. When the unit is fully charged the
charger will glow green and then your bike is ready to go.
Warning
Do not leave the Max charging for long periods of me aer it is fully charged. Once the
bike is charged unplug it ASAP.
ASSEMBLING the Max
To assemble the Max remove all the zip es and styrofoam and unfold it as seen in the
folding secon. Insert the handlebars into the handlebar colum and the seat post into the
seat column.
For a full assembly video please visit :
www.daymak.com/assembly/max
Or scan the QR code on the right.