EasyManua.ls Logo

Daymak MAX - Operation

Default Icon
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
battery (cont’d)
The battery will have a key hole where you
must put your key inside to begin operation.
The key can be turned to 3 positions
1) Unlocked - To set it to this position you must
PUSH IN and turn counterclockwise from the 1
position. This unlocks the battery so it can now
be removed from the frame. (When putting
it back in you must push in again and turn
clockwise to lock it) The key can be removed
from the battery in this position
2) O - When set to this position the unit will
not turn on. The battery will still be locked into
the frame, and the key can be removed from
the battery.
3) On - Set it to this position so that you can
turn on the bike or check the battery meter on
the battery. The key cannot be removed from
this position.
On the opposite side of the
baery you will nd a fuse. If
you have an issue where the
baery is not working. Please
replace the fuse seen here.

Related product manuals