Daymak MAX - Ebike Maintenance

27
The Brakes
The brakes on your e-bike are hydraulic disc brakes. They generally provide for very ne
stopping and control. This is a very tested and well-designed technology, but even so, the
brakes will require servicing from me to me, and may have to be adjusted for tension.
When the brakes are acvated, tension increases and the clamps engage. This is a very
eecve and reliable way to stop a vehicle.
The Chain and Pedals
The pedals are connected to the rear wheel. Along with the chain, they provide a human-
powered “drive train”. This is an important part of your e-bike. The pedals are not
removable and should not be removed.
VeHICLE IDENTIFICATION NUMBER
(VIN)
Your unit comes with a Vehicle Idenaon
Number. You should write this down and
keep it somewhere safe in case of the of
your unit. This is also required for registering
your warranty on the warranty secon of
Daymak.com. To nd the VIN on your Max
look at the le part of the frame where the
pedal arm reaches the bike.