Daymak MAX User Manual

23
Technical Data
This secon provides you with the technical specicaons for your e-bike.
The Motor and Wheel Assembly
The Tono X 36V has a 350 Wa magnec DC brushless motor on the rear wheel hub. This
type of motor has excellent low-end torque and high eciency when working within its
range. Note that while the motor is very quiet, it does produce some noise. Also aached
to the rear hub is the speed reducon gear and the speed free clutch.
The Freewheel
The wheels have freewheels, so the e-bike’s drive train is not xedly geared. This means
that when coasng or traveling downhill, you can turn o the engine and your e-bike will
connue to move without slowing. This feature will allow you to achieve faster speeds
when coasng, moving downhill or moving with the wind. It will also allow you to conserve
electrical power, because you will be able to let to the motor rest while moving.
The Controller
Daymak pioneered the development of intelligent component control in e-bikes. The
Daymak Drive technology developed by Daymak is the brain of your e-bike. It allows your
e-bike to achieve faster acceleraon, to climb steeper hills, and to save energy.
The electronic controller is located under the seat assembly. This controller eciently
regulates the speed and electronic funcons of the bicycle. It allows for stepless speed
adjustment, shuts o the motor when the brakes are acvated, has low voltage protecon
and has fuses to prevent excess current from damaging the e-bike’s systems.

Daymak MAX Specifications

General

Brand	Daymak
Model	MAX
Category	Scooter
Language	English