DaytonAudio HTA50BT - Front Panel Controls; Volume Control; Rear Panel Connections; Bluetooth Antenna

Thank you for purc hasing the Dayton Audio HTA50 BT Hybrid Stereo Tube Amplifier. The tube preamp
stage imparts a warm, natural sound quality while the solid state power amp offers superb audio fidelity
and efficiency. Multiple input options including streaming audio from USB devices are available, and
Bluetooth 5.0 provides refined wireless streaming from your mobile devices.
Features:
• 25W per channel RMS x2 into a 4 ohm load
• Built-in USB DAC for streaming digital media
• Bluetooth 5.0 wireless connectivity
• Doublesasahighfidelityheadphoneamplifier
• RCA mono subwoofer output
• Brushed aluminum housing lends a clean, modern look
• Wide variety of audio input options
• Short circuit protection circuitry
Top Panel:
1. Source Indicator
2. Source Selector
3. Play/Pause
4. Previous Track
5. Next Track
Front Panel:
6. Volume Control
Rear Panel:
7. Bluetooth Antenna
TurnthisantennatoaverticalpositionpriortousingtheBluetoothfeatureoftheamplifier.
8. PC-USB
9. AUX 2 Input
10. AUX 1 Input
11. Coaxial
12. Optical
13. Headphone Output
The HTA50BTdoublesasaheadphoneamplifierthatwilleasily drivemostheadphonesto
deliver a colossal sound stage and effortless dynamic range. The 1/8" stereo jack allows the
connection of most headphones.
Note: When headphones are plugged into the headphone jack, the speaker output connections
are disengaged.
14. Subwoofer Output
15. Front Left Speaker Connection
The speaker output connections utilize high quality binding posts which are color coded for easy
polarityidentification.Thebindingpostswillacceptbananaplugsorbarewireupto14AWG.
16. Front Right Speaker Connection
The speaker output connections utilize high quality binding posts which are color coded for easy
polarityidentification.Thebindingpostswillacceptbananaplugsorbarewireupto14AWG.
17. AC Power Connection
18. Input Voltage Selector
Thevoltageselectorswitchallowstheusertochangetheinputvoltagefortheamplifierbased
on their region’s voltage.