Need help?Do you have a question about the DaytonAudio SA230 and is the answer not in the manual?
Audio Specifications| rated power output (8 ohms) | 156 Watts RMS |
|---|---|
| rated power output (4 ohms) | 233 Watts RMS |
| signal to noise ratio | 85 dB A-weighted |
| input impedance | 12K ohms |
| bass boost | 25 Hz – 50 Hz |
| low pass adjustment | 40 Hz – 180 Hz |
| phase adjustment | 0° – 180° |
| gain | 0 dB – +10 dB |
Power| power requirements | 120/240 VAC, 50 Hz/60 Hz |
|---|---|
| stand-by power rating | 120V 0.82W |
Weight and Dimensions| dimensions | 17-1/4" W x 3-3/4" H x 13-7/8" D |
|---|---|
| weight | 18 lbs |
Instructions cover reading manuals, avoiding water, dry cleaning, ventilation, heat sources, and proper plug usage.
Covers cord protection, accessory use, cart safety, lightning, servicing, rain exposure, and grounding connections.
Front panel pushbutton power switch and indicator LED status for amplifier operation.
Adjustable phase compensation from 0 to 180 degrees to correct phase anomalies.
Adjusts low-pass crossover frequency from 40 Hz to 180 Hz for speaker integration.
Sets the overall amplifier level to match subwoofer output with system speakers.
Details High-Level Inputs (binding posts) and Line Inputs (RCA) for audio signal connection.
Covers Bass Boost, Remote Turn On, 12V Trigger Input, Speaker Outputs, and Voltage Selector.
Information on connecting the AC power cord and power consumption.
Details rated power, noise ratio, impedance, frequency adjustments, dimensions, and weight.
Provides guidance on identifying and resolving hum issues in the subwoofer system.
Outlines the product warranty period, limitations, and non-warranty service contact.
To Next Page