Detailed Parameters
Section 6
6.5 - Input Delay
Each input channel of the DriveRack 4800 and 4820 provide up to 680 mSec of Input Delay.
Delay On/Off switch
This turns the input channel Delay module on and off.
Delay fader
This sets the amount of delay time and is adjustable in either 10 or 20 µSec steps (one sample at either 96
or 48 kHz). The Input Delay maximum is 680 mSec.
Units switch
This selects what the Delay is expressed in, Seconds, Feet or Meters. The GUI shows all three simultane-
ously.
DriveRack
®
DriveRack
®
4800/4820 User Manual
44
To Next Page
Loading...
