dbx PX - Technical Specifications Overview

A.3 Specifications
ANALOG INPUTS:
Number of Inputs: 2 (Stereo) Line inputs
1 RTA Mic input
Connectors: 2 Female XLR line inputs
1 XLR RTA Mic input
Type: Electronically balanced, RF filtered
Impedance: >40kΩ
Max Input Line level: +20dBu
Input CMRR: >45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: <-110dBu, 22Hz-22kHz, 150Ω
ANALOG OUTPUTS:
Number of Outputs: 2 (Stereo) Line outputs
2 Sub outputs (mono or stereo)
Connectors: 2 Male XLR XLR line outputs
2 Male XLR Sub outputs
Type: Electronically balanced, RF filtered
Impedance: 120 Ω
Max Output Level: +20dBu
A/D PERFORMANCE:
Type: dbx Type IV™ conversion system
Dynamic Range: 110dB A-weighted
107dB unweighted
Type IV dynamic range: 123dB with transient material,
A-weighted, 22kHz BW
121dB with transient material,
unweighted, 22kHz BW
115dB typical with program material,
A-weighted, 22kHz BW
Sample Rate: 48kHz
D/A PERFORMANCE:
Dynamic Range: 112dB A-weighted
110dB unweighted
SYSTEM PERFORMANCE:
Dynamic Range: 110dB A-unweighted,
>107dB unweighted, 0.002% typical at +4dBu,
1kHz, 0dB input gain
THD+N:
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: <-110dB, 120dB typical
Crosstalk input to output: <-100dB
DriveRack
®
PX
Section A
Appendix
35
®