DCN S4600 Series User Manual

S4600 series Installation manual Chapter 1 Introduction
1-2
Fig 1-4 S4600-28P-P-SI Switch
Fig 1-5 S4600-28P-PL-SI Switch
Fig 1-6 S4600-10P-P-SI Switch
Fig 1-7 S4600-28C-SI Switch
1.2 Physical Specifications
 Management Port
1 RJ-45 serial console port
 AC Power Input
90 ～ 264VAC, 47Hz ～ 63Hz
 Power Consumption
S4600-10P-SI: <6.92W
S4600-28P-SI: <18.3W
S4600-52P-SI: <40W
S4600-28P-P-SI: <390W
S4600-28P-PL-SI: <230W
S4600-10P-P-SI: <144W
S4600-28C-SI: <20W
 Operating Temperature
-5 °C～50°C
 Storage Temperature
-40°C～ 70°C

DCN S4600 Series Specifications

General

Series	S4600 Series
Category	Switch
Layer Support	Layer 2/3
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	10/100/1000Base-T ports, SFP/SFP+ ports
VLAN Support	4K VLAN
Stacking	Yes
Power Supply	AC 100-240V, 50/60Hz
Management	Web, CLI, SNMP
Jumbo Frame	9K bytes
Dimensions (W x D x H)	440mm x 44mm
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
MAC Address Table	16K entries
Weight	Varies by model