DCN S4600 Series User Manual

S4600 series Installation manual Chapter 1 Introduction
1-5
Fig 1-14 Front Panel of S4600-28C-SI
1.3.2 Back Panel
The back panel of S4600-10P-SI is shown below:
Fig 1-15 Back Panel of S4600-10P-SI
The back panel of S4600-28P-SI is shown below:
Fig 1-16 Back Panel of S4600-28P-SI
The back panel of S4600-52P-SI is shown below, and there is 1 220V AC power
socket and 1 ground screw hole.
Fig 1-17 Back Panel of S4600-52P-SI
The back panel of S4600-28P-P-SI/S4600-28P-PL-SI is shown below, and there is 1
220V AC power socket and 1 ground screw hole.
Fig 1-18 Back Panel of S4600-28P-P-SI/S4600-28P-PL-SI
The back panel of S4600-10P-P-SI is shown below:
Fig 1-19 Back Panel of S4600-10P-P-SI
The back panel of S4600-28C-SI is shown below:
Fig 1-20 Back Panel of S4600-28C-S

DCN S4600 Series Specifications

General

Series	S4600 Series
Category	Switch
Layer Support	Layer 2/3
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	10/100/1000Base-T ports, SFP/SFP+ ports
VLAN Support	4K VLAN
Stacking	Yes
Power Supply	AC 100-240V, 50/60Hz
Management	Web, CLI, SNMP
Jumbo Frame	9K bytes
Dimensions (W x D x H)	440mm x 44mm
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
MAC Address Table	16K entries
Weight	Varies by model