115.6031.0 - 6 -
READ FIRST
WARNING: Water is the only acceptable heat transfer medium. No other uid is to be used!
INSTRUCTION MANUALS: Do not install, maintain, or operate this equipment without reading, understanding and following
the proper De Nora Water Technologies instructions and manuals, otherwise injury or damage may result.
RETURN OF EQUIPMENT: All equipment being returned to De Nora Water Technologies for repair must be free of any
hazardous materials (acids, alkalis, solvents, etc). A Safety Data Sheet (SDS) for all process uids must accompany returned
equipment. Contact De Nora Water Technologies for authorization prior to returning equipment.
NEMA 4X, Corrosion Resistant Finish: Certain parts of this product are painted with a high performance epoxy paint. The
corrosion protection provided by this nish is only eective if the nish is unbroken. It is the users’ responsibility to “touch-up”
any damage that has occurred to the nish during shipping or installation of the product. Special attention must be given to:
meter ange bolting, pipe mounting of electronics, conduit entries and covers that are removed to facilitate installation or
repair. For continued corrosion protection throughout the product life, it is the users’ responsibility to maintain the product
nish. Incidental scratches and other nish damage must be repaired and promptly re-painted with approved touch-up paint.
Provide the model number and size of your product to the nearest De Nora Water Technologies representative to obtain the
correct touch-up paint.
Read these instructions before starting installation; save these instructions for future reference.
To Next Page
Loading...
Need help?
General