Dea 202RR - OVERVIEW; PRODUCT CONFORMITY; WARNINGS

202 RR
Operating instructions and warnings
15
202RR
Control board 230V for gate automation operating
Instructions and warnings
ENGLISH
INDEX
OVERVIEW ................................................................................................................................15
1 PRODUCT CONFORMITY .....................................................................................................15
2 WARNINGS..........................................................................................................................15
3 MODELS AND CONTENTS OF THE PACKAGE .......................................................................16
4 PRODUCT DESCRIPTION ......................................................................................................16
5 TECHNICAL DATA.................................................................................................................17
6 OPERATING CONDITIONS ...................................................................................................17
7 ASSEMBLY AND WIRING INSTRUCTIONS........................................................................ 17-18
8 USE INSTRUCTIONS .............................................................................................................19
8.1 Visualization of inputs status .......................................................................................19
8.2 Setup and memorization of the motor stroke ...............................................................19
8.3 Built-in radio receiver..................................................................................................20
8.4 Personalization of working parameters ........................................................................21
8.5 Reset of default parameters (p.007).............................................................................21
8.6 Safety devices .............................................................................................................22
8.7 Messages shown on the display...................................................................................22
9 MAINTENANCE ....................................................................................................................23
10 PRODUCT DISPOSAL............................................................................................................23
11 COMPLETE CLOSING ASSEMBLY...........................................................................................24
OVERVIEW
These instructions were prepared by the manufacturer and are an integral part of the product. The
operations described are designed for adequately trained and qualified personnel and must be carefully
read and kept for future reference.
1 PRODUCT CONFORMITY
The 202RR programmable control board bears the CE label. DEA SYSTEM guarantees the conformity
of the product to European Directives 89/336/CE and subsequent amendments (concerning electroma-
gnetic compatibility), 2006/95/CE and subsequent amendments (low voltage electrical equipment).
2 WARNINGS
Read these warnings carefully. Failure to respect the following warnings may cause risk
situations.
WARNING DEA System reminds all users that the selection, positioning and installation of all ma-
terials and devices which make up the complete automation system, must comply with the European
Directives 98/37/CE (Machinery Directive), 89/336/CE and subsequent amendments (electromagnetic
compatibility), 2006/95/CE and subsequent amendments (low voltage electrical equipment). In order
to ensure a suitable level of safety, besides complying with local regulations, it is advisable to comply
also with the above mentioned Directives in all extra European countries.
A1
WARNING Using the product under unusual conditions not foreseen by the manufacturer may
cause dangerous situations; this is the reason why all the conditions prescribed in these instructions
must be followed.
A2
WARNING Under no circumstance must the product be used in an explosive environment or sur-
roundings that may prove corrosive and damage parts of the product.
A3