Getting ready to Embroider
12
Slip the thread through the slit and down into the eye of the take-
up lever as shown (D).
Draw the thread down through the left channel.
4 Slit
5 Eye of the take-up lever
Slip the thread behind the lower thread guide from the right.
6 Lower thread guide
Slip the thread in the needle bar thread guide from the left.
7 Needle bar thread guide
Thread the needle from front to back by hand or use the built-in
needle threader.
Note:
Refer to page 13 for built-in needle threader.
4
5
D
6
7
To Next Page
Loading...