Dectron DRY-O-TRON Supervisaire DSV 020 User Manual

On some units, the motors have internal overload protectors. On other units, motor protection involves external
overload protectors in the electrical enclosure. Using the unit wiring diagram, determine if the blowers and/or
compressors have external overload protectors in the electrical enclosure.
If so, locate the overloads for each blower and for each compressor. Units with optional built-on boilers or
optional pumped SmartSavers may also have overloads for glycol pumps.
Where external overload protectors are present, select the type of protector below and follow the instructions for
that type. Other protector types are possible.
Dectron, Inc. March 2012
DECTRON
DSH/DSV/RSH/DBH/RBH Series Dehumidifier Owner’s Manual
Startup Pre-Startup Adjustments
Data subject to change without notice.
218
STOP START
STOP
START
STOP START
To enable the
motor or to reset
the overload
protector, press
START.
To disable a
motor, press STOP.
To enable the
motor or to reset
the overload pro-
tector, press
START.
To disable a
motor, press STOP.
To enable the motor
or to reset the over-
load protector, turn
the knob clockwise to
the START position.
To disable a motor,
turn the knob to the
STOP position.
To enable the motor or to
reset the overload protector,
push in the blue button.
WARNING
Risk of electric shock. Can cause injury or death.
Exposed electric terminals may be present inside electrical and control enclosures.
Disconnect the branch circuit, and lockout and tagout sources of electric energy
before opening covers. Follow all safety regulations.
NOTICE
Risk of unit damage.
Call Dectron before changing the trip points.
STARTUP
6.12

Dectron DRY-O-TRON Supervisaire DSV 020 Specifications

General

Brand	Dectron
Model	DRY-O-TRON Supervisaire DSV 020
Category	Controller
Language	English