Dectron DRY-O-TRON Supervisaire DSV 040 - User Manual

FOR MODELS
DS DSV DB RS RB
010 010 010
015 015 015
020 020 020
030 030 030
040 040 040 040 040
042 042 042 042 042
050 050 050 050 050
060 060 060 060 060
062 062 062 062 062
080 080 080 080 080
082 082 082 082 082
100 100 100 100 100
102 102 102 102 102
120 120 120 120 120
122 122 122 122 122
150 150 150 150 150
152 152 152 152 152
162 162 162 162
164 164 164 164
182 182 182 182
184 184 184 184
202 202 202 202
204 204 204 204
242 242 242 242
244 244 244 244
282 282 282 282
284 284 284 284
362 362 362 362
364 364 364 364
368 368 368 368
402 402 402 402
404 404 404 404
408 408 408 408
482 482 482 482
484 484 484 484
488 488 488 488
562 562 562 562
564 564 564 564
568 568 568 568
804 804 804 804
808 808 808 808
Dectron, Inc. March 2012
Data subject to change without notice.
1
®
For future reference,
write your model number* here ______________
write your serial number* here ______________
write your ref number* here ______________
*See Product Description - Unit Nameplate.
Design, Installation, Start-Up, and Operation Manual
Arranged by Trades and Tasks
(Attach pages as addenda to contracts & work-orders.)
Contents:
Section
Product Description 1
Building Design and Construction 2
Receiving, Unloading, Lifting, & Locating 3
Installation 4
Pre-Assembly 4a
Air Distribution, Ventilation, & Ducts 4b
Piping 4c
Wiring 4d
Testing, Adjusting, and Balancing 5
Startup 6
Operation and Maintenance 7
Service 8
Prg
Esc
Esc
Prg
Supervisaire
®
CONTROLLER
1

Dectron DRY-O-TRON Supervisaire DSV 040 Specifications

General

Category	Controller
Brand	Dectron
Enclosure	NEMA 1
Model	DSV 040
Voltage	120 VAC
Operating Temperature	0°C to 50°C
Certifications	UL

Summary

Safety Warnings

Risk of electric shock

Covers hazards related to electrical shock during operation and maintenance.

Risk of explosive pressure release

Details hazards associated with refrigerant pressure and potential discharge.

Risk of top-heavy units tipping over

Addresses the risk of units tipping over, emphasizing proper handling and securing.

Risk of contact with moving parts

Highlights dangers associated with rotating components and V-belt drives.

Risk of flying liquids, gases, particles

Warns about potential eye injuries from flying materials during operation.

Installation

Testing, Adjusting, and Balancing

Procedures for ensuring the unit operates correctly and efficiently after installation.

Startup

Comprehensive steps for bringing the unit online and ensuring proper initial operation.

Testing, Adjusting, and Balancing

Safety

Safety precautions to be observed during testing and balancing procedures.

Test, Adjust, and Balance Airflows

Detailed procedure for adjusting and balancing system airflows to specified rates.

Startup

Pre-Startup Checklist

A comprehensive checklist to ensure all installation and pre-operational steps are completed.

Enable Operation

Step-by-step guide to bringing the unit into operational status.

Operation and Maintenance

Safety Warnings

Safety precautions to be followed for operating and maintaining the unit.

Maintenance

Routine maintenance tasks to ensure long-term unit function and longevity.

Service

Troubleshooting

General safety warnings and initial steps for troubleshooting unit issues.

Alarms

Diagnostics-Mechanical