To Next PageTo Next Page
Need help?Do you have a question about the Dectron DRY-O-TRON Supervisaire DS 010 and is the answer not in the manual?
Details various DRY-O-TRON® airflow configurations including basic, economizer, SmartSaver, and Purge options.
Covers critical safety aspects for building construction, including contamination, falling, and fire alarm failure risks.
Provides a diagram and detailed descriptions of the DRY-O-TRON® unit's main components and their arrangements.
Highlights crucial safety precautions for handling, lifting, and locating the unit to prevent injury or damage.
Guidelines for choosing a suitable installation location for the unit, considering temperature and humidity requirements.
Covers general safety guidelines and warnings pertinent to the installation process of the unit.
Outlines general wiring requirements, safety precautions, and considerations for optional equipment connections.
Details safety precautions specific to Testing, Adjusting, and Balancing procedures.
Provides guidance on checking blower belt tension, alignment, and replacement procedures.
Highlights critical safety warnings and precautions to be observed during startup procedures.
A comprehensive checklist covering all necessary steps before initial unit operation.
General safety guidelines and warnings applicable to unit operation and maintenance.
Lists routine maintenance tasks categorized by frequency: monthly, six months, and yearly.
General safety warnings and precautions applicable to troubleshooting and service procedures.
Explains how to access, interpret, and reset various unit alarms and error messages.
General| Manufacturer | Dectron |
|---|---|
| Type | Controller |
| Model | Supervisaire DS 010 |
| Display | Digital |
| Output Type | Relay |
| Operating Temperature Range | 32°F to 122°F (0°C to 50°C) |
