EasyManuals Logo

Dectron DRY-O-TRON Supervisaire DSV 020 User Manual

Default Icon
314 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Dectron, Inc. March 2012
DSH/DSV/RSH/DBH/RBH Series Dehumidifier Owners Manual
Building Construction Checklist
Data subject to change without notice.
50
BUILDING
CONSTRUCTION
DECTRON
Confirm that a continuous
vapor retarder is specified.
See Building Construction -
Moisture Migration.
Confirm that the windows are
specified as being glazed to
the inside. See Building
Construction - Door and
Window Design.
Confirm that the supply
diffusers will project air from
close to and at a sharp angle
to all exterior windows, doors,
or other surfaces that might
reach dewpoint. See Building
Construction - Air
Distribution.
Confirm that space heating will
be available at all times. See
Building Construction -
Space Heater Availability.
Confirm that the outdoor-air
intake (if any) will not be from
any forbidden zones. (See
Building Construction -
Outdoor-Air Intake.)
For indoor air handlers,
confirm that the air handler will
be located in a space where it
will not be exposed to corro-
sive gases emanating from a
swimming pool or spa. See
(See Building Construction -
Air Handler Location.)
For indoor air handlers,
confirm that the air handler will
not be installed in the same
space where pool chemicals
are stored, or in any space
that connects to any such
storage space. (See Building
Construction - Air Handler
Location.)
Confirm that sufficient space is
allowed around the DRY-O-
TRON® unit for installation
and service. (See Building
Construction - Air Handler
Location - Working
Clearances.)
For overhead installations,
confirm that there will be
sufficient and safe service
access, sufficient bracing, etc.
(See Building Construction -
Air Handler Location -
Overhead.)
Confirm that the location of a
remote condenser (if any) will
allow sufficient airflow clear-
ance all the way around it, and
sufficient and safe service
clearance. (See Building
Construction - Remote
Condenser Location.)
Confirm that the locations of
the air handler and of the
remote condenser (if any) are
such as will not require
connecting tube lengths
greater than specified in the
submittal or on the unit name-
plate. ( See Building
Construction - Maximum
Tube Length.)
Confirm that the duct specifi-
cations and the location of the
air handler will allow the
minimum straight duct lengths
near the unit. (See Building
Construction - Minimum
Straight Duct.)
Confirm that the location of the
return grille is not near a spa,
hot tub, etc. (See Building
Construction - Spa/Return-
Grille Placement.)
Confirm that the placements of
the return grille and the supply
diffusers are such as to allow
proper airflow over windows
and doors, and across the
pool. (See Building
Construction - Air
Distribution.)
Confirm that ducts exposed to
outdoor air will not sweat
inside the building. See
Building Construction - Duct
Insulation.
Confirm that any duct-mounted
smoke detectors or other elec-
tronics will not be subject to
condensed moisture. See
Building Construction -
Fire/Smoke Detectors.
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
your
initials
Date _________________
Model No. ________________
Serial No. ________________
Ref. No. _________________
Name _________________
Tel. _________________
2.34

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dectron DRY-O-TRON Supervisaire DSV 020 and is the answer not in the manual?

Dectron DRY-O-TRON Supervisaire DSV 020 Specifications

General IconGeneral
BrandDectron
ModelDRY-O-TRON Supervisaire DSV 020
CategoryController
LanguageEnglish

Related product manuals