5
The electrical plug must
remain accessible after
installation.
— It must be possible to
disconnect the appliance from
the power supply, either using
a plug or by fitting a switch
on the fixed wiring system in
accordance with installation
rules.
— If the power cable is
damaged, it should be replaced
by the manufacturer, its after-
sales service department or by
a similarly qualified person in
order to avoid danger.
— This appliance may be
installed either under a worktop
or in a cabinet column, as
indicated on the installation
diagram.
— Centre the oven in the unit
so as to ensure a minimum
distance of 10 mm between the
appliance and the surrounding
unit. The material of the unit
supporting the appliance must
be heat-resistant (or covered
with a heat-resistant material).
For greater stability, attach the
oven to the unit with 2 screws
through the holes provided on
the side panels.
— In order to avoid overheating,
the appliance must not be
installed behind a decorative
door.
— This appliance is designed to
be used for domestic and similar
applications such as :
Kitchen areas for the staff
of shops, offices and other
professional premises.
Farms. Use by clients of hotels,
motels and other residential type
establishments; guest house
type environments.
— The oven must be turned off
when cleaning inside the oven.
Do not modify the characteristics
of this appliance; doing so could
be dangerous.
Do not use your oven as a larder
or to store any items after use.
IMPORTANT SAFETY INSTRUCTIONS
To Next Page
Loading...
Need help?
General
