EasyManuals Logo

DeDietrich DOP8360 Series User Manual

DeDietrich DOP8360 Series
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
This mode will make the task all the easier
since the oven will automatically calculate
all the cooking parameters according
to the selected dish (temperature,
cooking time, type of cooking) thanks
to electronic sensors placed in the oven
that continuously measure the humidity
and temperature variation.
No preheating is required to use
the "CHEF" mode. Cooking must
IMPERATIVELY start cold oven.
IMMEDIATE COOKING
- Turn the knob to the "Chef" cooking
function.
The symbol
and "CHEF" are
displayed on the screen. Validate by
pressing the controller. Chef "1" ashes,
you have to choose your dish by turning
the controller..
The oven o󰀨ers a choice of 6 dishes (see
the list of dishes below).
- Select your dish and then validate.
- Validate again on the controller to start
cooking.
ATTENTION:
This method of cooking takes place in
two phases:
1- A first phase of research during
which the oven begins to heat up and
will determine the ideal cooking time.
This phase lasts between 5 and 40
minutes depending on the dish.
.
IMPORTANT: Do not open the
door during this phase so as not
to disturb the calculation and
recording of the data or the cooking
will be cancelled.
This research phase is represented by
an animation
.
2- A second phase of cooking: the oven
has adjusted the necessary time, this
research phase is represented by an
animation
.
The remaining time taken into account
the cooking time of the rst phase.
It is now possible for you to open the
door, to water or return your meats.
- The oven goes out when the cooking
time is over and your screen tells you
that the dish is ready.
DEFERRED DEPART COOKING
You can change the end time of cooking
before putting your dish in the proposed
bleacher.
- If you wish, you can change the end
time by pressing the
button and
displaying the new end-of-cooking time
when the oven has started.
Validate by pressing the controller.
The oven stops and will start later so that
the cooking nishes at the desired time.
«CHEF» MODE
5 COOKING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeDietrich DOP8360 Series and is the answer not in the manual?

DeDietrich DOP8360 Series Specifications

General IconGeneral
BrandDeDietrich
ModelDOP8360 Series
CategoryOven
LanguageEnglish

Related product manuals