What to do if my DeDietrich Boiler displays 'Gas Pressure Switch'?
If your DeDietrich Boiler displays 'Gas Pressure Switch', it indicates that the gas pressure is too low. You should check the gas supply pressure, ensure the gas tap is properly open, and inspect the wiring. If these are not the issue, the gas valve may be faulty and need to be checked or replaced.
What to do if my DeDietrich Boiler shows 'Max Tflow'?
If your DeDietrich Boiler displays 'Max Tflow', it means the flow temperature sensor is above the normal range. Check the wiring and connectors for bad connections, ensure the sensor is correctly fitted, and consider replacing the sensor if faulty. Also, check for no flow or insufficient flow by examining the circulation (direction, pump, valves), water pressure, and cleanliness of the heat exchanger.
General| Category | Boiler |
|---|---|
| Type | Condensing |
| Model | INNOVENS PRO MCA 160 |
| Power Output | 160 kW |
| Max working pressure | 6 bar |
| Max temperature | 90°C |
| Electrical supply | 230V / 50Hz |
| Protection rating | IPX4D |
| Fuel Type | Natural Gas |
| Efficiency | Up to 109% |
| NOx emissions | Class 6 |
| Connection diameter | DN 50 |
To Next Page
