DLED4 Series • Light Head and Power Supply • Instruction Manual • V1.1
6
Special safety hints
To draw attention to special Dangers in the safety instructions, the following symbols are being used.
DANGER! ... Identifies hazards caused by electrical current. Ignoring such safety hints may result in
severe injury or death.
Labels and Symbols in this manual
For the identification of instructions, descriptions of results, enumerations, references and other elements, this
manual uses the following signs and highlighted symbols.
Number 1 indicates step by step instructions.
→ Indicates a condition or an automatic sequence as a result of an operation step.
● Identifies lists and enumerations without fixed order.
▶ Indicates references to sections of this guide
[TASTE ] Indicates identifications of keys, buttons and other controls.
1.2 Limitations of liability
All information and instructions in this manual are assembled under consideration of applicable standards and
regulations, state-of-the-art technology.
The manufacturer assumes no liability for damages due to:
● Failure to follow these instructions
● Improper use
● Use by untrained staff
● Unauthorized modifications
● Technical changes
● Use of unauthorized spare parts
The actual scope of delivery can differ from the descriptions given in this manual for special designs and utilizing
additional order options or based on latest technical changes.
Agreements made according to the delivery contract are based on the general terms and conditions at the time
of contract.
To Next Page
Loading...
